MHS overlapping carousel slats are devices used in baggage handling. They are used to sort baggage in both departures and arrivals (baggage reclaim) Carousel Overlapping Slats are made of o coated metal frame, and work using one or more friction drive motors that are quiet have reduced maintenance time and require no lubrication. The friction drive system has a tensioning mechanism that con be either manual or automatic (managed by a control system) The modular system allows configurations suitable to any customer requirements. It is also possible to reconfigure previous layouts to new customer demands. Baggage is put onto a surface of plastic slats. The slats are assembled so that each slat overlaps the previously assembled slat. The machine may be, dependent upon intended use, stainless steel or steel coated.
| Carousel Overlapped Slats 0015-N-000-000 | |
| Linear Module Lenght | 1850 mm |
| External Curve Radius | 1690 mm |
| Useful width between edge | 1160 mm |
| Edge height | According to customer needs |
| Max Static load | 300 Kg/m |
| Max Dinamic load | 150 Kg/m |
| Speed | 0.5 m/sec. (inverter) |
| Power Motor | 3 kW |
| Voltage | 380 V |
| Frequency | 50 Hz |
| Finishing | Inox/Painted/According to customer needs |
| Temperature range | -5°÷ 40° c |
| Umidity Range | 10 ÷ 85% |
| Motor Group number | According to customer needs |
| Slat length | 1100 mm |
| Slat Thickness | 6 mm |
| Slat Material | PVC |
| Trasmission | Friction Drive |
| Maintenance | Easy desengarg gearbox |
| Maintenance | Automatic or manual shoot chain |
| Maintenance | Adjustable center chain |
